Starlink Mini
KSh 40,000.00 + VAT
KEY FEATURES
Ultra-compact flat dish design — easy to transport and store
Built-in Wi-Fi 5 router (dual-band) — no need for a separate router
Typical download speeds: ~50–100 Mbps; upload: ~5–20 Mbps
Latency: around 25–50 ms in many use cases
Power input via USB-C, enabling use with power banks or mobile setups
Average power draw: ~20–40 W
Rugged, weather-resistant housing for outdoor deployment
Self-installing with alignment help via the Starlink mobile app
Ideal for off-grid use, mobile deployments, and portable internet needs
- Kindly Note: Prices and Stock Status are Subject to Change without Prior Notice
- Bank Financing attracts an additional percentage
- NB: Warranty registration is the customer's responsibility
- Disclaimer. We can not guarantee that the product specs information on this page is 100% correct.
Starlink Mini In Kenya
Starlink Mini price in Kenya is at Ksh40,000
The Starlink Mini is a highly portable satellite internet terminal from SpaceX, designed for users who need reliable broadband in remote or mobile environments. Weighing around 1.1 kg, the dish is significantly smaller and lighter than the standard Starlink units, making it ideal for backpack travel, RVs, or temporary setups. It features an integrated phased-array antenna plus a built-in Wi-Fi 5 router, eliminating the need for additional external networking gear.
Power consumption is relatively low (~20–40 W), which allows the Mini to be powered by USB-C power banks or vehicle power supplies. Despite its compact size, it delivers meaningful speeds—advertised and reported peak download speeds range around 50–100 Mbps, with typical upload speeds between 5–20 Mbps, and a latency of 25–50 ms depending on location. The Mini is rated for outdoor use with weather-resistant construction, and comes with setup tools via the Starlink app to guide alignment and optimal placement.
Buy Starlink Mini Best Price Online From CELLULAR KENYA,NAIROBI
Related products
Starlink Mini 3 in1 Cable 5M
KEY FEATURES
Length: 5 meters for flexible placement
Three power connector types: USB‑C, DC barrel plug, cigarette lighter plug
Supports high power for the Mini (up to ~100W with compatible source)
Durable construction: thick copper wiring and robust protective jacket
Designed for outdoor and mobile use
Plug-and-play — easy to connect with no complex setup
Enables flexible power sourcing from battery banks, vehicles, or DC sources
Fully compatible with Starlink Mini
Starlink Mini Power Adapter
KEY FEATURES
Supports 12–48 V DC input for flexible power sourcing
Also supports 100–240 V AC input, making it usable with wall outlets
Designed specifically for the Starlink Mini dish
Power output supports up to ~60 W (depending on use)
Built-in safety features: overvoltage, overcurrent, short circuit protection
Compact and portable form factor — easy to carry and install
Compatible with power banks, solar setups, vehicle power systems (with appropriate converters or USB‑C PD)
Efficient for mobile/off-grid use — low typical power draw (around 25–40 W)
Starlink V3 Cable 46M
KEY FEATURES
Length: 46 meters (150 feet) for long-distance installations
Carries both data and power using Power-over-Ethernet (PoE)
Weatherproof and durable for outdoor use
Maintains high-speed data transmission without bottlenecking performance
Compatible with Starlink Gen 3 / V3 systems
Uses proprietary PoE pinout for proper dish operation
Ideal for rooftop, pole, or remote mounting scenarios
Simplifies installation by combining power and data in a single cable
Starlink V2 Router
KEY FEATURES
Dual-band Wi-Fi (2.4 GHz + 5 GHz)
Wi-Fi 5 technology (802.11a/b/g/n/ac)
Supports up to about 128 connected devices
3×3 MIMO for stronger signal and better stability
Coverage area of approximately 185 m² (around 2000 sq. ft.)
WPA2 security encryption
Dust and splash resistance (IP54 rated)
Simple Starlink mobile app setup
Needs Starlink’s Ethernet Adapter to add a LAN port
Compatible with Starlink Mesh nodes
Works in bypass mode with third-party routers
Average power usage roughly 50–75 watts (for the whole system including dish)
Starlink V3 Router
KEY FEATUREs
- Wi-Fi Technology: Tri-band Wi-Fi 6 (802.11ax) with 4×4 MU-MIMO support, operating on 2.4 GHz and dual 5 GHz bands. This allows it to handle up to 235 simultaneous devices with reduced interference and higher throughput compared to the dual-band Wi-Fi 5 Gen 2 router.
- Coverage: Up to 3,200 sq ft (297 m²) per router, making it suitable for large homes or offices. It supports mesh networking with up to 3 additional Starlink Mesh Nodes (Gen 2 or Gen 3 compatible) for extended range.
- Ports and Connectivity: Two Gigabit Ethernet RJ45 ports (one for WAN from the dish, one for LAN to devices). Uses standard Ethernet cables instead of proprietary connectors, simplifying setup and replacements.
- Design and Durability: Compact white rectangular unit (dimensions: 1.7 x 11.76 x 4.74 inches; weight: 1.25 lbs). IP56-rated for water and dust resistance, operable in temperatures from -22°F to 122°F (-30°C to 50°C). Primarily for indoor use but can handle some outdoor exposure. Includes a power indicator on the front.
- Security: WPA2 encryption standard.
- Power: 100-240V AC input; can receive power over Ethernet (PoE) via the WAN port when paired with the Advanced Power Supply.
- Compatibility: Works with Starlink Dish V4 (Gen 3 flat high-performance dish), Gen 2 rectangular dish, Standard Actuated dish, Mini dish, and older circular models. Not compatible with third-party mesh systems.
