Starlink Mini Power Adapter
KSh 11,500.00
KEY FEATURES
-
Supports 12–48 V DC input for flexible power sourcing
-
Also supports 100–240 V AC input, making it usable with wall outlets
-
Designed specifically for the Starlink Mini dish
-
Power output supports up to ~60 W (depending on use)
-
Built-in safety features: overvoltage, overcurrent, short circuit protection
-
Compact and portable form factor — easy to carry and install
-
Compatible with power banks, solar setups, vehicle power systems (with appropriate converters or USB‑C PD)
-
Efficient for mobile/off-grid use — low typical power draw (around 25–40 W)
Starlink Mini Power Adapter In Kenya
Starlink Mini Power Adapter price in Kenya is at Ksh11,500.
The Starlink Mini Power Adapter is the dedicated power supply specially built for the compact, portable Starlink Mini dish. Unlike older Starlink models that use a PoE system, the Mini draws its power via a DC barrel jack, allowing for a more flexible and efficient power setup. It supports a broad input voltage range — anywhere from 12 V to 48 V DC — and can operate with a variety of power sources, making it ideal for both stationary and mobile deployments. When connected via AC, the adapter works with global voltages (100–240 V) and provides a regulated output that keeps the Mini running reliably even under fluctuating input conditions. The Mini itself consumes relatively low power — typically 25–40 W on average — which helps minimize energy use, especially when used with battery banks or in off-grid scenarios. This power supply also has built-in safety protections (such as over-current and over-voltage protection) to safeguard both the Mini and your power source.
Buy Starlink Mini Power Adapter Best Price Online From CELLULAR KENYA,NAIROBI
Related products
Huawei wifi AX3S
• Dual-band 2.4 GHz and 5 GHz operation
• Up to ~2976 Mbps combined wireless speed
• Four auto-adaptive Gigabit Ethernet ports
• Mesh networking support (EasyMesh / HarmonyOS Mesh+)
• Intelligent band steering
• WPA3 security encryption
• Guest Wi-Fi and parental controls
• App-based setup and management
Xiaomi Electric Scooter 5 pro
-
Rear-wheel motor delivering enough torque for city commutes
-
Top speed ~25 km/h (depending on conditions)
-
Large battery (≈ 477 Wh) for extended range — suitable for daily commuting
-
Aluminum/steel frame with foldable design for easy carrying and storage
-
10-inch tubeless tyres for stability and comfort on uneven roads
-
Dual suspension (front & rear) for smoother ride over bumps and potholes
-
Dual braking system (front mechanical + rear electronic brake) for reliable stopping
-
Supports rider weight up to approx. 120 kg
-
Water-resistant build to handle light rain or splashes
-
Compact, portable design — useful for mixed commuting (scooter + public transport)
Starlink Mini 3 in1 Cable 5M
-
Length: 5 meters for flexible placement
-
Three power connector types: USB‑C, DC barrel plug, cigarette lighter plug
-
Supports high power for the Mini (up to ~100W with compatible source)
-
Durable construction: thick copper wiring and robust protective jacket
-
Designed for outdoor and mobile use
-
Plug-and-play — easy to connect with no complex setup
-
Enables flexible power sourcing from battery banks, vehicles, or DC sources
-
Fully compatible with Starlink Mini
Starlink V3 Power Adapter
-
Converts AC power (100–240V) to the high-voltage DC needed by Gen 3 Starlink
-
Typical output: around 57V at 3.42A (≈195W) depending on version
-
Supports Power-over-Ethernet (PoE) through the Gen 3 router
-
Built-in safety protections (over-current, over-voltage, overheating)
-
Stable and clean power for the Gen 3 dish and router
-
Compact and durable design
-
Works with the standard Starlink Gen 3 dish and router
-
Designed for home, office, and off-grid installations
-
Can be used with solar or battery systems if voltage is matched correctly
Starlink V2 Router
-
Dual-band Wi-Fi (2.4 GHz + 5 GHz)
-
Wi-Fi 5 technology (802.11a/b/g/n/ac)
-
Supports up to about 128 connected devices
-
3×3 MIMO for stronger signal and better stability
-
Coverage area of approximately 185 m² (around 2000 sq. ft.)
-
WPA2 security encryption
-
Dust and splash resistance (IP54 rated)
-
Simple Starlink mobile app setup
-
Needs Starlink’s Ethernet Adapter to add a LAN port
-
Compatible with Starlink Mesh nodes
-
Works in bypass mode with third-party routers
-
Average power usage roughly 50–75 watts (for the whole system including dish)
Starlink V3 Router
- Wi-Fi Technology: Tri-band Wi-Fi 6 (802.11ax) with 4×4 MU-MIMO support, operating on 2.4 GHz and dual 5 GHz bands. This allows it to handle up to 235 simultaneous devices with reduced interference and higher throughput compared to the dual-band Wi-Fi 5 Gen 2 router.
- Coverage: Up to 3,200 sq ft (297 m²) per router, making it suitable for large homes or offices. It supports mesh networking with up to 3 additional Starlink Mesh Nodes (Gen 2 or Gen 3 compatible) for extended range.
- Ports and Connectivity: Two Gigabit Ethernet RJ45 ports (one for WAN from the dish, one for LAN to devices). Uses standard Ethernet cables instead of proprietary connectors, simplifying setup and replacements.
- Design and Durability: Compact white rectangular unit (dimensions: 1.7 x 11.76 x 4.74 inches; weight: 1.25 lbs). IP56-rated for water and dust resistance, operable in temperatures from -22°F to 122°F (-30°C to 50°C). Primarily for indoor use but can handle some outdoor exposure. Includes a power indicator on the front.
- Security: WPA2 encryption standard.
- Power: 100-240V AC input; can receive power over Ethernet (PoE) via the WAN port when paired with the Advanced Power Supply.
- Compatibility: Works with Starlink Dish V4 (Gen 3 flat high-performance dish), Gen 2 rectangular dish, Standard Actuated dish, Mini dish, and older circular models. Not compatible with third-party mesh systems.
Starlink Mini
-
Ultra-compact flat dish design — easy to transport and store
-
Built-in Wi-Fi 5 router (dual-band) — no need for a separate router
-
Typical download speeds: ~50–100 Mbps; upload: ~5–20 Mbps
-
Latency: around 25–50 ms in many use cases
-
Power input via USB-C, enabling use with power banks or mobile setups
-
Average power draw: ~20–40 W
-
Rugged, weather-resistant housing for outdoor deployment
-
Self-installing with alignment help via the Starlink mobile app
-
Ideal for off-grid use, mobile deployments, and portable internet needs
TP-Link Deco M5 AC1300 Whole Home Mesh Wi-Fi System (3 Pack)
- Deco uses a system of units to achieve seamless whole-home Wi-Fi coverage — eliminate weak signal areas once and for all!
- With advanced Deco Mesh Technology, units work together to form one unified whole-home network with the same network name. Devices automatically switch between Decos as you move through your home for the fastest possible speeds.
- A Deco M5 three-pack delivers Wi-Fi to an area of up to 5500 square feet, while a Deco M5 two-pack delivers up to 3800 square feet. And if that’s not enough, simply add more Decos to the network anytime to increase coverage.
- Deco M5 provides fast and stable connections with speeds of up to 1267Mbps and works with any internet service provider (ISP) and modem.
- Deco can handle traffic from even the busiest of networks, providing lag-free connections for over 100 devices.
- TP-Link HomeCareTM provides a suite of personalized and secure features, including Parental Controls, built-in Antivirus and Quality of Service (QoS).
- Setup is easier than ever with the Deco app there to walk you through every step.