UGREEN US519 85W USB-C to Magsafe 2 Charging Cable 2m
Price range: KSh 1,400.00 through KSh 2,000.00 + VAT
KEY FEATURES
-
High-Resolution Support
: Handles up to 4K UHD (60Hz), 2K (165Hz), and 1080p (144Hz).
- High Bandwidth: Provides 21.6 Gbps total bandwidth for lag-free data transfer.
- Advanced Features: Supports 3D content, Multi-Stream Transport (MST), and G-Sync/FreeSync.
- Superior Audio: Transmits high-definition, multi-channel digital audio formats.
- Secure Connection: Features locking latches on both connectors to prevent accidental unplugging.
- Premium Build: Constructed with 28AWG oxygen-free copper and triple shielding to minimize interference.
- Durable Connectors: Equipped with gold-platedplugs to resist corrosion and wear.
- Kindly Note: Prices and Stock Status are Subject to Change without Prior Notice
- Bank Financing attracts an additional percentage
- NB: Warranty registration is the customer's responsibility
- Disclaimer. We can not guarantee that the product specs information on this page is 100% correct.
UGREEN US519 85W USB-C to Magsafe 2 Charging Cable 2m in Kenya.
UGREEN US519 85W USB-C to Magsafe 2 Charging Cable 2m  price in Kenya is at Ksh2,000.
Buy UGREEN US519 85W USB-C to Magsafe 2 Charging Cable 2m Best Price Online from CELLULAR KENYA,Nairobi
| Length | 1.5m, 3m, 5m |
|---|
Related products
CM620 UGREEN 4-in-1 HDMI Splitter
KEY FEATURES
-
1x4 Splitting
: Distributes one HDMI input signal to four HDMI outputs simultaneously.
- High Resolution: Supports up to 4K Ultra HD(30Hz or 60Hz depending on model) and 3D video.
- Mirror Mode: Duplicates the same contentacross all connected screens (does not extend desktops).
- Plug-and-Play: Works immediately without the need for additional drivers or software.
- Broad Compatibility: Works with laptops, gaming consoles, Blu-ray players, and various monitors or TVs.
- Lossless Audio: Supports high-definition audio formats like Dolby TrueHD and DTS-HD Master Audio.
- Metal Housing: Durable aluminum or metal shell for better heat dissipation and longevity.
- Signal Stability: Includes a built-in signal booster to maintain quality over long cable runs.
- HDCP Compliant: Ensures compatibility with protected digital content from streaming devices.
Huawei wifi AX3S
KEY FEATURES
Wi-Fi 6 (802.11ax) support
• Dual-band 2.4 GHz and 5 GHz operation
• Up to ~2976 Mbps combined wireless speed
• Four auto-adaptive Gigabit Ethernet ports
• Mesh networking support (EasyMesh / HarmonyOS Mesh+)
• Intelligent band steering
• WPA3 security encryption
• Guest Wi-Fi and parental controls
• App-based setup and management
Starlink Mini Pivot Mount
KEY FEATURES
-
Specifically designed for Starlink Mini user terminals
-
Adjustable pivot arm for precise tilt and elevation alignment
-
Secure locking mechanism to hold the Mini in place once aligned
-
Built from weather-resistant, powder-coated steel for outdoor durability
-
Pre-drilled mounting holes for robust attachment to roofs, poles, or walls
-
Integrated cable management features or clips for smart wire routing
-
Compact footprint optimized for the smaller form factor of Mini
-
Suitable for angled roofs, sloped surfaces, or limited installation zones
-
Helps maintain optimal signal alignment and performance over time
-
Durable design for long-term, low-maintenance deployments in remote or mobile use cases
Starlink Mini Power Adapter
KEY FEATURES
-
Supports 12–48 V DC input for flexible power sourcing
-
Also supports 100–240 V AC input, making it usable with wall outlets
-
Designed specifically for the Starlink Mini dish
-
Power output supports up to ~60 W (depending on use)
-
Built-in safety features: overvoltage, overcurrent, short circuit protection
-
Compact and portable form factor — easy to carry and install
-
Compatible with power banks, solar setups, vehicle power systems (with appropriate converters or USB‑C PD)
-
Efficient for mobile/off-grid use — low typical power draw (around 25–40 W)
Starlink V2 Cable 46M
KEY FEATURES
-
Length: 46 meters (150 ft) — very long reach for flexible installation
-
Compatible with Starlink Gen 2 (V2) rectangle dish
-
Handles both data and power (PoE‑style)
-
Weather‑resistant design for outdoor deployment
-
High-speed: supports very high data throughput over the full length
-
Plug-and-play: easy to install without complex setup
-
Shielded wiring for signal integrity and minimized interference
-
Proprietary connectors: designed specifically for V2 hardware
Starlink V3 Power Adapter
KEY FEATURES
-
Converts AC power (100–240V) to the high-voltage DC needed by Gen 3 Starlink
-
Typical output: around 57V at 3.42A (≈195W) depending on version
-
Supports Power-over-Ethernet (PoE) through the Gen 3 router
-
Built-in safety protections (over-current, over-voltage, overheating)
-
Stable and clean power for the Gen 3 dish and router
-
Compact and durable design
-
Works with the standard Starlink Gen 3 dish and router
-
Designed for home, office, and off-grid installations
-
Can be used with solar or battery systems if voltage is matched correctly
TP-LINK Deco M4 – AC1200 Whole Home Mesh Wi-Fi System (3-Pack)
key features:
- Whole Home Coverage: Deco M4 (3-pack) uses a system of units to achieve seamless whole-home WiFi coverage up to 5,500 sq. ft. — eliminate weak signal areas once and for all!
- TP-Link Mesh Technology: With advanced Deco Mesh Technology, units work together to form a unified network with a single network name. Devices automatically switch between Decos as you move through your home for the fastest possible speeds**
- Fast Dual-Band WiFi: Deco M4 provides fast and stable connections with speeds of up to 1167 Mbps and works with major internet service provider (ISP) and modem.*
- Connect More Devices:Â Deco can handle traffic from even the busiest of networks, providing lag-free connections for up to 100 devices.*
- Parental Controls: Limit online time and block inappropriate websites according to unique profiles created for each family member.
- Easy Setup:Â Setup is easier than ever with the Deco app there to walk you through every step.
