Latest Products
Starlink Mini USB-C to DC Power Cable 5M
KEY FEATU
Specially designed for Starlink Mini terminal power input
Converts USB-C power to the DC power input required by the Mini
Enables use of USB-C power banks or mobile power stations
High-quality internal wiring to minimize voltage drop and ensure stable power delivery
Durable, weather-resistant connectors for repeated use
Lightweight and flexible cable design for portable and mobile installations
Ideal for travel, camping, RV, off-grid, or emergency setups where traditional power isn’t available
Supports safe power delivery when paired with compatible USB-C sources capable of delivering required voltage/current מאַטעריאַל with no compromise on performance.
RES
Starlink Mini Carrier Box
KEY FEATURES
IP67-rated for water and dust protection
Custom foam inserts sized for the Mini dish, router, cables, and power supply
Durable, impact-resistant construction
Ergonomic handles for comfortable carrying
Keeps your Starlink Mini system safe and secure during travel or storage
Ideal for fieldwork, travel, remote camps, and portable deployments
Starlink Mini Pivot Mount
KEY FEATURES
Specifically designed for Starlink Mini user terminals
Adjustable pivot arm for precise tilt and elevation alignment
Secure locking mechanism to hold the Mini in place once aligned
Built from weather-resistant, powder-coated steel for outdoor durability
Pre-drilled mounting holes for robust attachment to roofs, poles, or walls
Integrated cable management features or clips for smart wire routing
Compact footprint optimized for the smaller form factor of Mini
Suitable for angled roofs, sloped surfaces, or limited installation zones
Helps maintain optimal signal alignment and performance over time
Durable design for long-term, low-maintenance deployments in remote or mobile use cases
Starlink V3/V4 – Pivot Mount
KEY FEATURES
Compatible with Starlink V3 and V4 user terminals
Adjustable pivot arm for tilt alignment
Locking mechanism to secure dish once aligned
Durable, weather-resistant powder-coated steel construction
Pre-drilled mounting holes for easy installation
Ideal for sloped roofs or non-vertical mounting surfaces
Starlink V3/V4 -L-Shape Mount
KEY FEATURES
Compatible with Starlink V3 and V4 user terminals
L-shaped bracket design for 90° vertical mounting
Heavy-duty, weather-resistant construction for outdoor durability
Pre-drilled mounting holes for secure installation on poles, walls, or rails
Corrosion-resistant materials to support long-term deployment
Minimizes footprint while maintaining structural stability
Helps preserve signal alignment by keeping the dish steady
Suitable for residential, marine, or remote installations
Starlink Mini 3 in1 Cable 5M
KEY FEATURES
Length: 5 meters for flexible placement
Three power connector types: USB‑C, DC barrel plug, cigarette lighter plug
Supports high power for the Mini (up to ~100W with compatible source)
Durable construction: thick copper wiring and robust protective jacket
Designed for outdoor and mobile use
Plug-and-play — easy to connect with no complex setup
Enables flexible power sourcing from battery banks, vehicles, or DC sources
Fully compatible with Starlink Mini
Starlink Mini Power Adapter
KEY FEATURES
Supports 12–48 V DC input for flexible power sourcing
Also supports 100–240 V AC input, making it usable with wall outlets
Designed specifically for the Starlink Mini dish
Power output supports up to ~60 W (depending on use)
Built-in safety features: overvoltage, overcurrent, short circuit protection
Compact and portable form factor — easy to carry and install
Compatible with power banks, solar setups, vehicle power systems (with appropriate converters or USB‑C PD)
Efficient for mobile/off-grid use — low typical power draw (around 25–40 W)
Starlink V2 Cable 46M
KEY FEATURES
Length: 46 meters (150 ft) — very long reach for flexible installation
Compatible with Starlink Gen 2 (V2) rectangle dish
Handles both data and power (PoE‑style)
Weather‑resistant design for outdoor deployment
High-speed: supports very high data throughput over the full length
Plug-and-play: easy to install without complex setup
Shielded wiring for signal integrity and minimized interference
Proprietary connectors: designed specifically for V2 hardware
Starlink V3 Cable 46M
KEY FEATURES
Length: 46 meters (150 feet) for long-distance installations
Carries both data and power using Power-over-Ethernet (PoE)
Weatherproof and durable for outdoor use
Maintains high-speed data transmission without bottlenecking performance
Compatible with Starlink Gen 3 / V3 systems
Uses proprietary PoE pinout for proper dish operation
Ideal for rooftop, pole, or remote mounting scenarios
Simplifies installation by combining power and data in a single cable
Starlink V3 Power Adapter
KEY FEATURES
Converts AC power (100–240V) to the high-voltage DC needed by Gen 3 Starlink
Typical output: around 57V at 3.42A (≈195W) depending on version
Supports Power-over-Ethernet (PoE) through the Gen 3 router
Built-in safety protections (over-current, over-voltage, overheating)
Stable and clean power for the Gen 3 dish and router
Compact and durable design
Works with the standard Starlink Gen 3 dish and router
Designed for home, office, and off-grid installations
Can be used with solar or battery systems if voltage is matched correctly
Starlink V2 Router
KEY FEATURES
Dual-band Wi-Fi (2.4 GHz + 5 GHz)
Wi-Fi 5 technology (802.11a/b/g/n/ac)
Supports up to about 128 connected devices
3×3 MIMO for stronger signal and better stability
Coverage area of approximately 185 m² (around 2000 sq. ft.)
WPA2 security encryption
Dust and splash resistance (IP54 rated)
Simple Starlink mobile app setup
Needs Starlink’s Ethernet Adapter to add a LAN port
Compatible with Starlink Mesh nodes
Works in bypass mode with third-party routers
Average power usage roughly 50–75 watts (for the whole system including dish)
Starlink V3 Router
KEY FEATUREs
- Wi-Fi Technology: Tri-band Wi-Fi 6 (802.11ax) with 4×4 MU-MIMO support, operating on 2.4 GHz and dual 5 GHz bands. This allows it to handle up to 235 simultaneous devices with reduced interference and higher throughput compared to the dual-band Wi-Fi 5 Gen 2 router.
- Coverage: Up to 3,200 sq ft (297 m²) per router, making it suitable for large homes or offices. It supports mesh networking with up to 3 additional Starlink Mesh Nodes (Gen 2 or Gen 3 compatible) for extended range.
- Ports and Connectivity: Two Gigabit Ethernet RJ45 ports (one for WAN from the dish, one for LAN to devices). Uses standard Ethernet cables instead of proprietary connectors, simplifying setup and replacements.
- Design and Durability: Compact white rectangular unit (dimensions: 1.7 x 11.76 x 4.74 inches; weight: 1.25 lbs). IP56-rated for water and dust resistance, operable in temperatures from -22°F to 122°F (-30°C to 50°C). Primarily for indoor use but can handle some outdoor exposure. Includes a power indicator on the front.
- Security: WPA2 encryption standard.
- Power: 100-240V AC input; can receive power over Ethernet (PoE) via the WAN port when paired with the Advanced Power Supply.
- Compatibility: Works with Starlink Dish V4 (Gen 3 flat high-performance dish), Gen 2 rectangular dish, Standard Actuated dish, Mini dish, and older circular models. Not compatible with third-party mesh systems.
Starlink V3/V4
KEY FEATURES
Enhanced beamforming for improved signal sensitivity and strength
More efficient RF electronics for better throughput and lower power consumption
Designed for mobile and remote use cases (homes, vehicles, marine)
Rugged, weather-resistant build rated for various environmental conditions
Easy self-installation with Starlink app alignment assistant
High-speed broadband: supports Starlink’s latest satellite networks
Low-latency connection suitable for gaming, video calls, and real-time applications
Built-in Wi-Fi router (depending on model or bundle)
Real-time monitoring via Starlink app: speed, signal, and usage statistics
Firmware updatable over the air for ongoing performance improvements
Starlink Mini DC To DC Cable
key features
- Tailored for Starlink Mini: This Starlink power cable is tailored only for Starlink Mini version. Perfect replacement for 32.8FT/10M Starlink Mini power cable.
- Steady transmission: High quality copper wire inside enhance convenience and efficiency for your Mini Starlink.
- High quality and durable: This power cable for Starlink Mini is crafted from high-grade 18AWG wires, provides remarkable durability and efficient power transmission, sticking to the highest standards.
- Plug and Play: Plug in the power cable of Starlink Mini and no need for other operation. Perfectly compatible with Starlink Mini.
- Waterproof and Wide Applicability: With this waterproof Starlink Mini Cable you can enjoy high speed Internet service on harsh weathe
Starlink Mini 3 in 1 MINI CABLE
key features
- Tailored for Starlink Mini: Designed for seamless compatibility.
- Versatile Connections: USB-C, cigarette lighter, and DC plug options.
- Effortless Setup: Plug-and-play functionality.
- High Power Support: Delivers up to 100W output.
- Durable Construction: Built with PVC and copper for longevity.
